Which Macbook is better for Ruby on Rails development?

Ruby On Rails Development

If you are not concerned with price range, then there are a lot and you can select any of the Macbook Retina. Modern laptops, 2010 and up, will be OK to most Rails tasks. You can try a Retina since it make a real step up, with the flask disk and the amazing screen. Try one at your closest mac shop or maybe with a friend. It is really a job to write code on any editor of your and the disk speed will be a huge difference in a lot of tasks, both dev and non-dev. The Ruby on Rails (RoR) development services can be provided using a Macbook.

Better Macbook for Ruby on Rails

1.   Though Macbook makes a great Laptop for web development, it really is not necessary. But if you would like to buy a starting model of a macbook for Ruby on Rails development as you hardly use RAM eating software in rails development.  We are at a series where we can even do rails development even in a chromebook through the browser (nitrous io especially amazing).

2.  If possible, the best can be Retina display Biggest screen, the text looks good in that with 4- 8 GB RAM, and whichever macbooks fits will work great. Rails will work great with most Mac Books.

3.    MacBook Pro is short and skinny with following few features:
•    13” Screen
•    4 GB RAM
•    2.4 GHz CPU Intel core i5
•    500 GB Toshiba SATA
•    16 GB DDR 1333 MHz DDR3

4.    For acceptable speed and responsiveness, you can go with using:
•    Chrome
•    Smart Git
•    RubyMine

5.   The biggest advantage of Macbook Pro Retina with 17 processor and 16GB of RAM because:

•    Retina doesn’t tire your eyes and you will observe the difference between any other standards screen and a retina one. After using Retina, you may assure that you won’t be as eager as before to attach an external monitor unless is a retina monitor.

•    You need the 17 processor for intensive tasks which in some cases you will encounter quite often. For example if you run tests in parallel you will notice the difference in tens of seconds or even minutes, when running large test suites.

•    Memory will be necessary to be able to run multiple processes directly in memory. Using an IDE like RubyMine is also quite a big memory consumer. Caching the app in memory for performance increase is also another use case. Running test in parallel will require starting multiple instances of your application. Thus the needed memory for each instance will require more RAM.

MacBook pro mid 2013 is great and sufficient for professional development of Magento, PHP, node and virtualize with vagrant, also as it has a 13 inch screen, it allows greater mobility. For any other queries related to Macbook and Ruby on Rails, feel free to contact us at Laitkor.com helpdesk.

Share:

Read More

Which is best suited .Net framework for developing hostel management system, Web application or Standalone application?

.Net Application Development

It is actually hard to say without knowing the functionality required/requirements. Usually requirement should drive the technology stack. It will also depend on the goal of the mini project you are about to do. It is obvious that .Net has got so many good frameworks that are responsible for .Net Application Development.

Which is best: Web Application or Stand Alone Application

1.  If the goal of your mini project is learning, you can opt for a technology stack that you want to learn. You can go with the web application (if interested) using the client- side stack. It will be a good opportunity for you to learn ASP.Net MVC, Entity Framework or another Framework. You can also go with SQL server, JavaScript, HTML 5, CSS, Knockout js or some other backend.

2.   By Web Application, information can be controlled and accessible from any place and device as per our choice. But the disadvantage of web application is, it always requires internet connection.

3.   Standalone Application has a good speed, so user interface can be designed without keeping in view of data transmission. The biggest disadvantage is the data access, which is limited to single system.

4.   It will actually depend on the usability- if the application is going to be accessed from one machine then standalone app is good considering speed and resource. If end users are distributed and want to access from remote place then it has to be in web, and ultimately it needs internet connection.

5.   It will depend on the framework with which you are most comfortable. Web application is easy to deploy on any server with little amount of money. You need to justify your project on what you are interested in and what you are about to make with it.

6.  The hostel management system project software application is of advantage for computerizing different types of works included in managing student details, payment details, department details, etc. Choose the framework that fulfills most of your requirements more easily.

First, you need to set the goal of your project. Then you must understand the framework on which you have more access. If you are more comfortable with Web Application, go for it. Else, you may give a try for standalone Application. If you are uncertain about both the framework, go with Web application and study it in detail.

Share:

Read More

What are the steps for migrating from an ASP.NET website to Windows Azure?

Azure Development Services

If you are interested in deploying an ASP.Net Web app to Windows Azure, with Report Viewer control for SSRS reports, you can find instructions at Use ReportViewer in a web site Hosted in Windows Azure. You should ask yourself if / why you want to migrate. Azure gives you incredible scalability if developed for- otherwise just use a different cloud service. Azure development is very helpful to create a new Windows Azure project by using perfect coding system.

Migrating from an ASP.NET Website to Windows Azure

1.    You need to follow these steps:

•    Convert your project to 2010
•    Convert ASP.NET website to Web Application.
•    Then on the solution file, you need to click Add project
•    After that choose cloud project (and do not choose any role)
•    Then Right click the cloud project
•    Then choose add role from solution
•    Add WebRole.cs to web application project
•    Run and test
•    If everything works then you are in the cloud then.

2.    The very first step is to create a new Windows Azure project. The project should be into which code from your existing web application will be migrated.

3.    After the code, you need to make the new project to work in the cloud rather than on a ‘local’ web server. In particular, you can move configuration settings from web.config to the Azure RoleEnvironment. After that set the number of instances of the site to be running in the cloud. Then, Address options for handling session state in the cloud.

4.    Then deploy your newly cloud-enabled application to the cloud.

5.   This could be easy and straight forward steps to follow until you hit issues or problems.

•    If your website needs access to the local file store
•    NO LONGER VALID
•    There are few differences between SQLAzure and SQL2008

You must necessarily follow the above steps to migrate from ASP.NET to Windows Azure in an easy way. All you need is to create a new Windows Azure project and then continue development on it. The project must be efficiently handled within proper coding system and under expert developer unit.

Share:

Read More

What are some of the things junior PHP developers should know, but don’t often know?

PHP Developers

There are over 3000 built-in functions in PHP. A lot of PHP developers implement slow code in PHP when they could do the same work many times faster and in one line of code by using a built-in function. It pays to go read the documentation on all the built-in extensions and functions. But the most common gap in knowledge for junior PHP developers is: PHP itself.

What should be known?

1.    Here is the list of few complimentary knowledge that most of the junior developers don’t have:

•    PHP: The right way of coding and implementing.
•    PSR-1: Basic coding standard
PSR-2: Coding Style Guide
•    Security: How much secure is your work?
•    Source control with Git
•    Object-Oriented PHP
•    Frameworks like Laravel
•    Exception handling
•    Unit testing with PHP unit

2.    All the junior developers need to learn some of the following things:

•    How to properly plan to code: Don’t just start up writing codes. Before doing that first think of what test cases you will need to pass.

•    How to properly write code: You must try to write the absolute least amount that would be able to complete your next test. Don’t try to write the whole situation all at once.

•    How to Structure code properly: Try to keep your code modular and Don’t Repeat Yourself. Write each modular part in such a manner that it performs its one function without having to know all sorts of outside knowledge about the functions that are calling it.

•    How to comment code properly: You must follow the commenting standards of the project. Remember that just because you know why a certain coding choice was made right now, you won’t remember that when you have to return to your code later on.

•    How to test code properly: You need to understand some of the testing like Unit testing,integration testing and functional testing. You must start with the unit testing and make sure that it is the absolute smallest possible unit at that.

•    Appreciate the values of standard: Learn and follow the coding standards for the project on which you are working. It doesn’t matter whether the standards correspond to your preferred way of doing things, you may expect the variation from your normal ways.

If a junior developer wants to grow as an engineer, they should not just rely on one language but dig into one or more other programming languages. The junior developers should keep a proper communication with their peers, with the manager and with people in other teams. They should know it is very important to comply with code conventions and standards, as eventually it saves times to them and everyone else.

Share:

Read More

Why would anyone pay to use Microsoft Azure if it’d be possible to run ASP.NET 5 natively on Linux servers for free?

Azure Development Services - Laitkor

Tool like Azure is making it easy to deploy an app and as a developer all you need is to run your app successfully. So, the reason you use Azure web apps or similar services (Heroku, etc) is to avoid dealing with servers at all. Azure provides a number of effective features for Azure development, so there is no loss to pay a few dollars.

Why pay for Azure?

1.    It appears as comparing oranges to apples. You must remember that you pay to Azure for the platform by having cloud servers with its abilities to scale as needed. This is done without having to maintain the servers as well as security, backup and various other features and tools. You can run Linux or .Net on it.

2.    ASP.Net and Linux are totally different from one another and cannot be compared at an ease. Always remember, Linux is a platform whereas Azure is what Microsoft provides as Platform as a Service (PaaS). There is option to get Linux VM in Azure. Only having Linux is not all sufficient but you should also have the machine, the power and internet connection to host an application. Azure is the complete package. You can compare Azure and AWS but not Azure and Linux.

3.    Microsoft Azure has Linux boxes. And for servers you always have to pay regardless of platform. Azure is far the easiest provider you have ever used. From a usability perspective, it is mostly used over AWS, discount hosts etc. Things that can be pain in advanced setups are drop-dead simple in Azure.

4.    Automated scaling, queues, distributed session management and storage are all integral part. You can have it all features by pointing and clicking or by implementing an elegant API. You can also get the same features on AWS, but everything is just a little easier in Azure, and Azure feels less

5.    Generally, Discount hosts are less expensive, but a lot of them may be less capable as well. Azure is cost saving & reasonably priced. It tends to cost about as much as an equivalent setup on AWS. Auto-scaling will be easy and automatic that will usually save you a few dollars as well. Cost really depends on the service you use, how much you use them, and if you have optimized for the platform.

“cobbled together” than AWS.

App development and deployment in Azure is very easy. Azure has Linux boxes and is one of the easiest providers that can be used. Some of the important features include4 automated hosting, storage and distributed session management. If it fulfills all your requirements along with maintaining Quality, it is no harm to spend a few dollars on it.

Share:

Read More

What is Windows Azure equivalent of Amazon CloudWatch?

Azure development - Laitkor

The developers can monitor the resource availability of their Amazon EC2 by Amazon CloudWatch. Azure provides decent amount of visibility on its dashboards and via its own alerting system. It is good enough to get started and maintain / monitor basic systems. Once you get more sophisticated or have needs that outgrow Azure’s native monitoring / dashboard capabilities, there are a few products to be considered. Laitkor provides Azure development and can help you at any point of time.

Windows Azure equivalent of Amazon CloudWatch

1.    Recently, CloudMonix released which replaces a popular Azure-specific monitoring service AzureWatch. It is SaaS based, and does monitoring of most Azure platform and services. It also has very sophisticated autoscaling and automation engines.

2.    There are many popular and quite expensive tools like New Relic and AppDynamic. They concentrate on APM monitoring and are not Azure specific. They won’t tell you if your Azure Service Bus is down or a storage queue is not getting depleted, but they provide /real /nice view to help with diagnostic of an issue that has occurred in your app.

3.    You can also utilize Azure Diagnostic to monitor the resources of your roles and then use a tool like Azure Diagnostic Manager to visualize the output.

4.    There are several data sources beyond CloudWatch for Amazon. Consider these features on Azure:

•    Trace switches: Allows for traces of transactions to be taken off the Azure apps
•    Azure Diagnostic: Log data for Azure apps
•    Performance Counters: Essentially like WMI for Azure.

5.    You can store these features within the Azure storage in your instance. This of course is mostly based on PaaS role. If you are using IaaS roles, you have additional metrics which can be collected with APM agents or infrastructure monitoring agents. The most popular tools on Azure for APM are AppDynamics and New Relic.

The above PHP frameworks are best suited for making a scalable platform. For any assistance related to PHP framework and development, get support at our laitkor helpdesk.

Share:

Read More

What is the best tool for deploying .Net applications?

.Net Application Development - Laitkor

For ease in automation and transition from one environment to another, you will need the best deploying tools. Choose the tools more precisely that fits according to your work requirement. For .Net applications, there are number of available tools that must be used in .Net Application Development.

Best tools

1.   Octopus

It is a user friendly deployment tool that will work with your build server. It is secure, reliable, automated release of ASP.NET applications and Windows Services into test. It can also play a better role in staging and production environments, where they are on-premise or in the cloud. Octopus has a wide range of use, working for small teams to larger enterprises.

2.    App Harbor

It is a fully hosted .Net Platform as a service. It can easily scale and deploy any standard .Net application to the cloud. It can be used by a number of developers for personal blog to larger business work. It integrates nicely into developer workflow and takes care of all the sys admin work for you.

3.    AppVeyor

It provides all delivery services for Windows that enables you to build new server in a cloud. It does not require any setup. This tool is robust and secure that will keep your code safe with isolated build environments. You can get continuous delivery to build, test and deploy with AppVeyor.

4.    NSIS (Nullsoft Scriptable install System)

It is an open source system to create Windows installers in professional world. The design feature involves making it small and reliable that is best suited for Internet distribution. By using this tool, you can get everything that is required to set up your software.

5.    Bamboo

Bamboo is one of the professional tools that can be widely used to build, test and deploy. It is free to start and ensures continuous delivery from code to deployment. It provides best support for continuous delivery and you can easily control the flow with per-environment permissions. You can integrate Bamboo with Bitbucket, JIRA Software,Fisheye, HipChat and many other tools.

Deployment tool provides ease in automation and transition from one environment to environment. Some of the best deployment tools include: NSIS, Bamboo, AppVeyor, AppHarbor and Octopus, which are vividly explained above. These tools are made for easy deployment and are much secure to operate and handle.

Share:

Read More

Is it reliable to use PHP & MySQL in a secure money transaction platform?

PHP Developers - Laitkor

For secure money transaction, a developer plays a very important role to make your application secure. However, PHP is itself sufficient to make your application secure. Magento, Woocomerce, Prestashop and WordPress are all made with PHP. So you don’t worry about security issues with PHP, but you worry about choosing an expert among PHP Developers.

Secure money transaction

1.    Of course these can be used in a secure money transaction, but it depends on several factors including security strength and encryption algorithms.  PHP is usually targeted by hackers more than any other languages. This is due to the low level of programming quality of the majority of PHP programmers who fail to maintain the quality and security. So you have a lot of aspects to think more than just the language itself.

2.    There are a number of big companies that use PHP & MySQL for sensitive information, such as WordPress and Woocomerce.  All you need is to follow best practices available and always stay updated with the latest code releases. It is now preferred to use prepared statements to prevent SQL Injections because your values are not hardcoded to the SQL statement.

3.     Also, you can try to learn how to use other methods of network-security and how NguixNugenix works, at least a little. You can use this when you are about to create some applications that will surely be depending a lot on security, especially when it comes to data users.

4.    There is a wide difference in developing a website and a payment gateway. You are free to use any language or platform that best suits for developing a site. By selecting a good and reliable payment gateway, secure money transfer can be assured.

5.    As concerned with security, it is not a matter of how you express the thing. It is a matter of procedures. A secure platform is a platform which was tested by a third party security expert who was able to read all of the code and make hard questions to your engineers.

It mainly depends on the developer’s hand who make your application secure. Many of the reputed company (including WordPress) rely on PHP & MySQL for sensitive information.

You are free to get any platform or language that pleases you for developing website and payment gateway.

Share:

Read More

How and Why You Should Install CDN with Your WordPress Website?

CDN – an overview

CDN stands for content delivery network. It is the preferred solution for optimization of websites on a global basis. The basic work of CDN is to send a cached file related to all media content to the hosting server. This is used to increase the speed of the WordPress blog. Basically, CDN is a network of servers and helps in reducing the overload of the main server. This is an imperative asset for WordPress Development when considering large scale operations.

    Why do we need CDN with our WordPress website?

1. Speed 

When we have a huge amount of internet audience, our server gets down because of multiple users accessing the website and requesting for the same resources. This will lead to the reduction in the speed of the website and this will ultimately cause a poor user experience which is a strict no-no! This can be remedied when we install CDN. Always opt for WordPress Development that includes the installation of CDN.

2. User experience

Most companies find that after installing CDN, the bounce rate of the website drops down. Also, it increases the rate of pages viewed by the users. This is directly because users notice the improved speed of the website and thus their interest is not distracted by pages that are too slow to load. It is all about your products, services and website content now!

3. Crash resistance

With the help of CDN, we can distribute the server load to the multiple users. When we get 100% traffic on our website, we are likely to head towards a server crash in case the load isn’t distributed. Developing CDN along with WordPress Development for your website is a good idea to prevent server crashes.

4. SEO friendly

With CDN installed, your website is likely to sustain more user interest and thus the bounce rate as well as the time for which users stay on your website will increase. This will give your website better ranking in popular search engines. The site ranking can be improved by generating organic audience for your website and by the amount of organic traffic that flows into your website and stays on it. All this can be achieved through installation of CDN.

 CDN Installation Procedure

1. First, click on the cloudfare icon that you find in the advance tab. Then set up a domain name as per your requirement. When your domain name is fixed, you need to click on the gray colored cloud icon. This completes your first step by setting up the primary CloudFlare protection.

2. If you need to do it manually, then log on to the official site http://www.cloudflare.com/ and sign up for a new account. A form will then appear which needs to be filled with the necessary information. Now you can easily add your website by entering the URL. After a few seconds,there will be a scanning process for all your documents and files, and you will be directed to another DNS zone file.

3. Finally, you will get two DNS servers in which you must replace one server in the domain name. This will be done on the dashboard. So, it may take 24 hours to get activated. With this you are done with CDN installation; it is that simple!

With this blog, we have brought to you the need for CDN installation and steps involved in installation of the CDN. CDN helps in boosting the speed of the website and reduces the load on the server. For WordPress Development, it is an essential step; if you are looking for WordPress Development, make sure that you go with the CDN installation as well.

Share:

Read More

What are some of the things junior PHP developers should know, but don’t often know?

PHP Developers - Laitkor

There are over 3000 built-in functions in PHP. A lot of PHP developers implement slow code in PHP when they could do the same work many times faster and in one line of code by using a built-in function. It pays to go read the documentation on all the built-in extensions and functions. But the most common gap in knowledge for junior PHP developers is: PHP itself.

What should be known?

1.    Here is the list of few complimentary knowledge that most of the junior developers don’t have:

•    PHP: The right way of coding and implementing.
•    PSR-1: Basic coding standard
PSR-2: Coding Style Guide
•    Security: How much secure is your work?
•    Source control with Git
•    Object-Oriented PHP
•    Frameworks like Laravel
•    Exception handling
•    Unit testing with PHP unit

2.    All the junior developers need to learn some of the following things:

•    How to properly plan to code: Don’t just start up writing codes. Before doing that first think of what test cases you will need to pass.

•    How to properly write code: You must try to write the absolute least amount that would be able to complete your next test. Don’t try to write the whole situation all at once.

•    How to Structure code properly: Try to keep your code modular and Don’t Repeat Yourself. Write each modular part in such a manner that it performs its one function without having to know all sorts of outside knowledge about the functions that are calling it.

•    How to comment code properly: You must follow the commenting standards of the project. Remember that just because you know why a certain coding choice was made right now, you won’t remember that when you have to return to your code later on.

•    How to test code properly: You need to understand some of the testing like Unit testing,integration testing and functional testing. You must start with the unit testing and make sure that it is the absolute smallest possible unit at that.

•    Appreciate the values of standard: Learn and follow the coding standards for the project on which you are working. It doesn’t matter whether the standards correspond to your preferred way of doing things, you may expect the variation from your normal ways.

If a junior developer wants to grow as an engineer, they should not just rely on one language but dig into one or more other programming languages. The junior developers should keep a proper communication with their peers, with the manager and with people in other teams. They should know it is very important to comply with code conventions and standards, as eventually it saves times to them and everyone else.

Share:

Read More

Why would anyone pay to use Microsoft Azure if it’d be possible to run ASP.NET 5 natively on Linux servers for free?

Azure Development Services - Laitkor

Tool like Azure is making it easy to deploy an app and as a developer all you need is to run your app successfully. So, the reason you use Azure web apps or similar services (Heroku, etc) is to avoid dealing with servers at all. Azure provides a number of effective features for Azure development, so there is no loss to pay a few dollars.

Why pay for Azure?

1.    It appears as comparing oranges to apples. You must remember that you pay to Azure for the platform by having cloud servers with its abilities to scale as needed. This is done without having to maintain the servers as well as security, backup and various other features and tools. You can run Linux or .Net on it.

2.    ASP.Net and Linux are totally different from one another and cannot be compared at an ease. Always remember, Linux is a platform whereas Azure is what Microsoft provides as Platform as a Service (PaaS). There is option to get Linux VM in Azure. Only having Linux is not all sufficient but you should also have the machine, the power and internet connection to host an application. Azure is the complete package. You can compare Azure and AWS but not Azure and Linux.

3.    Microsoft Azure has Linux boxes. And for servers you always have to pay regardless of platform. Azure is far the easiest provider you have ever used. From a usability perspective, it is mostly used over AWS, discount hosts etc. Things that can be pain in advanced setups are drop-dead simple in Azure.

4.    Automated scaling, queues, distributed session management and storage are all integral part. You can have it all features by pointing and clicking or by implementing an elegant API. You can also get the same features on AWS, but everything is just a little easier in Azure, and Azure feels less “cobbled together” than AWS.

5.    Generally, Discount hosts are less expensive, but a lot of them may be less capable as well. Azure is cost saving & reasonably priced. It tends to cost about as much as an equivalent setup on AWS. Auto-scaling will be easy and automatic that will usually save you a few dollars as well. Cost really depends on the service you use, how much you use them, and if you have optimized for the platform.

App development and deployment in Azure is very easy. Azure has Linux boxes and is one of the easiest providers that can be used. Some of the important features include4 automated hosting, storage and distributed session management. If it fulfills all your requirements along with maintaining Quality, it is no harm to spend a few dollars on it.

Share:

Read More

The Beginner’s Guide to A/B Testing with WordPress

A/B testing is basically simultaneously operated testing which is executed among two different web pages. This sort of testing is done to compare the performance of the two pages in question and ascertain as to which one is more effective from an end user’s perspective. This testing mechanism is excellent for judging the effectiveness of the web application and gauging the developer’s efficiency. With A/B testing, one can judge the WordPress speed and effectiveness and this will help people assess as to whether the website is on par with their expectations and where it stands when compared to other sites. We bring to you some of the basic steps involved in setting up A/B testing and executing it and these will help you judge the effectiveness of your WordPress Development.

    Setting up of A/B testing

You need to have a clear idea as to whether you need an onsite test or an offsite test? After the selection of the type of test, you must execute it on the elements like the exact text employed, the exact location to be chosen for the action or color of the button or any other surrounding space. Usually, this is done before making any important decision regarding the websites.

    Optimization of the conversions

Now you need to choose the website in which you need to conduct the test for the conversation rate. So, select the website first and choose the element you want to split over the site during the testing. Now divide the entire scenario into two divisions namely A and B and present both the web page versions to testers/users for a given period say a day. At the end of the day, you will get to know the conversation rate of the web pages. Whichever page has the better conversation rate will tell you which version works better and this is one of the best aspects of A/B testing.

    Elements of the A/B testing

This test is done for determining the speed of the web page. It is used to test some of the aspects like headers of the web page, body copy, and images of the web page or response to the buttons. All you need to test on the web page is the content of the web page. That’s why page elements are necessarily tested. Typical page elements such as call to action buttons, subscription forms and related posts widget or promotional campaigns etc. are tested in this method. The main elements of the A/B testing are the measures and planning adopted for the segment of the website that needs to be measured.

    Need for A/B testing

This method of testing is usually employed by companies who are contemplating different strategies and help them plan actions, designs and patterns. Anyone indulging in WordPress Development should employ this technique to understand exactly what works and what doesn’t and then come up with a conversion and marketing strategy for the business.

    Improvement in Bottom line

Appropriate A/B testing can improve your bottom line. Through this, you can arrive at the exact strategies required to expand your business. When you conduct the A/B testing on a regular basis, your baseline targets improve and conversion begins to improve at a superior rate. Thus, for effective marketing A/B testing is a must!

If you are looking at WordPress Development for your business, planning for A/B testing is thus a very important step. Planning ahead and working on the results of the tests to improve your site can help you land more leads and customers than with other techniques.

Share:

Read More

Ways to Secure WordPress Website in Just 15 Minutes

WordPress is the trending platform in today’s world. Why do we opt for a WordPress website? The most frequent response to this question that it helps to improve the popularity of our business as WordPress websites are quickly developed and easily maintained. However easy and express WordPress Development might be, security is yet another question altogether. For after all, in a time and age where anything and everything is being hacked and information theft is at an all-time high, what is the point of a website if it is not secure?

We bring to you some of the measures that should be taken into consideration to keep a WordPress website secure. Read on to learn how to secure your website in just 15 minutes!

How to secure your WordPress website?

    Backup

Prior to deleting some useful information, you need to ensure that you have a backup for the important and crucial part of the data. Backups are the primary step to be taken when you wish to safeguard your WordPress website. This will ensure that you can recover all your website data even if it gets destroyed due to some untoward or accidental circumstances. Backup should be a part of your planning stage and should be considered when you begin WordPress Development. When you sign up and get a domain name for yourself, make sure that you delete the previous WordPress directories.

1. Update all software in the new hosting account

After you sign up and get a new hosting account, you need to update all the WordPress core installations, themes, plugins or any extensions already built. Any of the applications like PHPMyAdmin, Joomla, Drupal or MediaWiki should also be updated to keep up with the new settings of WordPress Development. In case of any custom installation that was done previously and you are unable to get it updated hire a developer to help you out and maintain it for you. However, this can be expensive as maintenance is a costly affair and not having custom apps properly updated can cause issues in the future.

2. New WordPress installation

Once you are signed up, figure out the appropriate website section and install WordPress. Also, be sure to install the WordPress security plugin for safety purposes. Make sure that you start using the two-factor authentication which keeps you secure all the time. Whenever your account is being accessed, you will get details about logins and you will be notified of the same. Ensure that you change the admin username or delete the previous admin username and password settings. Opting for limited login attempts is another important security feature to have.

3. Extended protection mode

For extensive security, you can install the WordFence plugin and use its firewall. Enable the extended protection mode on active mode post installation of the plugin. Proceed to perform the scanning of your website with WordFence and address the issues highlighted post scan. This step ensures that your website devoid is safe and protected. This should be a mandatory task before you begin with your WordPress Development. Enable SSL for website data security as this helps in encrypting the data.

The final WordPress settings to be done

When you have set up your new username, you should be able to log in and access the control panel to finalize the security. Now eliminate all the unnecessary stuff (installations and restore settings to normal or customize it as per your requirements) and move them to the trash. Go to the general settings and create your site title; this will be displayed as the name of the website. At last, set up your wordpress permalink and post your blogs. Once all this is done, you can be assured of security for your WordPress site and keep unwanted attacks and risks at bay.

Share:

Read More

Things to keep in mind before developing an iPhone App

With incredible technology and a user-friendly approach, the iPhone has been successful in building a great reputation and brand loyalty. There are many who swear by its class, unique features and brand image. And Apple on its part has followed stringent policies when it comes to its product- the iPhone.

There are certain things to be kept in mind when you consider designing an app for iPhone; given that the user base is niche and the number of apps flooding the AppStore every day is simply too huge to count.

    1.Consider user’s perspective:

When you think of developing an iPhone app, the first question you must ask yourself is: “Is the app worth it?” Know the purpose of your app and why and when will the users want to use it. If it is meant to be an m-commerce app, then are the users going to benefit from it? Put yourself in the user’s shoes and do an analysis of what a user would want from the app.

2. Analyze the market and customers for your app:

How will your app standout from other similar iPhone apps? What category of customers will your app target? Take surveys and do some researches to know the market feasibility of your app. Know that iPhone is widely used in USA, Canada and Australia. In the rest of the countries, its penetration is far low when compared to Android users. (Blame it on the high cost of the device!) So, when designing an iPhone app keep in mind that you cater to a certain audience which prefers brand and class and not affordability.

3. Design a framework:

User Interface (UI) and User Experience (UX) are the prime factors to be considered when you start on the planning and development aspect. There are many ready automation tools and frameworks available for designing and building an iOS app. Also, there are many websites and tutorials which will help a layman gradually build an iOS app. Always see to it that the design is simple and user friendly.

4. Hire a good iOS developer:

Consulting and taking the services of an experienced iOS developer comes in handy when designing an iPhone app. iOS App development needs some expertise and experience and developers help to fill in that gap when an amateur will find it hard to code.

5. Test it before you launch it:

If you want your app to be certified by the App store, then it shouldn’t be buggy nor should it crash or get stuck while loading. Keeping these things in mind go for proper testing techniques for your iPhone app.

Things not to be ignored when developing an iPhone app:

    Learn Objective-C or Swift, the program coding language used by iOS.
    Practice as much as you can. Just reading stuff online and watching video tutorials won’t help. Start with small projects on every topic.
    Consult your peers who are into app development. Have a talk with iOS app developers. Use networking to chat extensively for queries, tips and inputs.
    When you submit your work to the App store, know that the process isn’t easy. There are a lot of rules and regulations that are to be adhered to and the people out there are very strict regarding the apps. So, when your app passes some stringent tests, only then does it get the approval.
    And once approved, start with your marketing strategy to ensure that your app gets noticed by users. The time is long gone when you designed an app and it got noticed with you having done nothing to promote it.

Pre planned processes work out smoothly at the end. Ensure that is the case with you also when designing an iPhone app.

Share:

Read More

InHouse or Outsourcing WordPress Development – How to Take the Final Decision?

Well this has been a longtime debate! Both the ideas have their own merit and benefits and businesses must contemplate this question all the time and arrive at a decision. We opt for outsourcing when our in-house capacity is already stretched or is limited or we simply don’t have the wherewithal to dedicate or hire resources just for that particular activity.

WordPress development is one area where companies contemplate this decision – whether to do it in-house or get it done by experts who are capable of swift delivery as in the case of outsourcing. Given that this is a critical decision, companies look at a variety of factors arriving upon a decision. Here are some factors companies consider during decision making; read on.

    Initiation of operations

When it comes to In-house development, companies need to set up the infrastructure and allocate resources for the activity. Training, man power, time and a lot of resources are consumed in the process when it comes to in-house WordPress development. But in outsourcing the development, there is a drastic cost reduction without any quality related problems. Hiring of experts who are ready to begin work from the word go reduces the time to market too which is a very important factor for companies in today’s globalized arena.

    Developers

Hiring qualified and experienced folks to work on WordPress development can be time consuming when you consider an in-house operation. Hiring is a huge process – scouring through resumes and choosing the right candidates for the job after rounds of interviews, giving them adequate compensation to retain them in the company and so on. Add training and induction programs to this and the process does assume gargantuan proportions. And yet, if you have a need for large scale development activities, this could still be a viable option.

The risk in outsourcing is very less as it accomplishes the complete development and delivery charges at fixed charges without the infrastructure and resource requirements. The catch here lies in choosing the right partner to outsource your work and this again requires some ground work. All the same, outsourcing is a better option for most SMEs given that they don’t have enough resources to dedicate most of the time.

    Work experience

With outsourcing, you get the option of hiring people who are well versed with WordPress development and you get to avail their services at affordable prices. They are well experienced and professional and deliver on time while also being updates about the latest trends and advancements in the field currently. On the other hand, in In-house functioning hiring experts could be a problem owing to the salary expectations. Also, it doesn’t make sense to hire someone full time incurring more expense when you can get quality work done at lesser price and that too on time!

    Growth

Startups prefer outsourcing WordPress development services as they have to focus on their core business activities. Also, they won’t be able to afford the expensive infrastructure for the software setup and have work stations for the developers set up as well. Most startups begin with outsourcing and once they grow big, they consider in-house options for critical development activities.

Thus, outsourcing is perhaps the best option when it comes to startups and SMEs as they are usually short staffed and don’t have the requisite infrastructure. In cases where an organization is huge too outsourcing will be cost effective and the more efficient option when the work is dependent on specific projects alone and the company doesn’t need a full-fledged development team in-house.

Share:

Read More

How to make a secure PHP login system?

PHP Development - Laitkor

You can make a secure PHP login system either from scratch or you can use an out of the box system. There are already a number of good PHP login systems available for purchase, or free download. If you want you can modify them or use them as it is. We provide you a first class php development services and security by panel of our expert PHP Developers.

Making a secure PHP login system

1.    You must use sessions and not raw cookies, as they can be spoofed and messed with far easier.

2.    When storing passwords, the current reasonably safe way to go is with a hash and a decent sized random salt. Don’t just hash it or just store it as a plain text.

3.    Secure from SQL injections.

4.    Detect and prevent brute force attacks. There are a couple ways to do this, or at least make it prohibitively expensive for people with CAPTCHA crackers so long as you have decent password requirements.

5.    You can use a framework like Laravel, which has register / login functionality out of the box, so you basically don’t have to do anything. You must also use a well-tested project and not a random one.

6.    If you want to create your own from scratch, here are the steps to be followed:

•    Always sanitize. Never trust your users.
•    Don’t use good-old*_mysql functions, use mysqli or PDO instead. When you feel comfortable, start using a mysql wrapper class, or better, an ORM.
•    Don’t store user – password in plain text in database.
•    Do not create a hashing algorithm to encrypt passwords. It is totally a bad idea so better use an existing one instead.
•    Create an authentication throttling system, this will slow down script kiddies but it can’t be said the same thing for highly motivated people. Learn what CSRF stands for. This is seriously very important.

You can use scratch or out of the box system for making a secure Php login system. Raw cookies must be eliminated and you can use sessions instead. You are required to secure your server from SQL Injection. For password storing, try a complex one with a hash and not in just a plain text. You can rely on a well trusted project rather than going with a random one.

Share:

Read More

What is the best server monitoring tool in .Net Application?

 .Net Application Development - Laitkor

For availability and performance monitoring, you can use .Net framework agent from IBM’s ITCAM for Microsoft Applications package. For transaction monitoring, you can use .Net Data Collector from IBM’s ITCAM for Transaction package. These are server class products, you might want to check what basically you want and whether it compensates you want and whether it compensates well with the pricing. There are many server monitoring tools in .Net Application that is best suited for .Net Application Development and security.

Server monitoring tools

1.    Stackify

Try Stackify. It is one of the easiest tools to use and provides all your basic need in one place for the DB, Server as well as business application. You can easily find and fix application problems fast with one platform that is simple to use.

2.    Fusion reactor

Fusion reactor is just awesome to actively reduce server downtime and accelerate time to resolution along with “monitoring” device which is provided by no other monitoring tool in the market.

3.    New Relic

It uses real time data to bring customer and business together, since your business and customer depend on increasingly complex applications and infrastructure. It helps to monitor real user interactions to quickly identify errors, drop-offs and crashes in optimal user flows. It enables to maintain a two way flow of information between Asp.application and development to design a better product.

4.    AppDynamics

It can provide distributed transaction monitoring across multiple languages. You can easily sign up and download or try the SaaS product. Some of the most complex .Net apps are using App Dynamics today.

5.   Ruxit

It is all-in-one full stack availability and performance monitoring that is powered by artificial intelligence. Within 5 minutes, one can start end- to- end performance monitoring. It do not require any manual configuration and the customizable dashboard views will show you your application’s performance SQL statement, data and code level insight.

There are number of server monitoring tools that can be used for .Net application. Some of the best tools are discussed above. Stackify is one of the easiest tool that provides all the basic needs at one place. Fusion Reactor actively minimizes the server downtime.

Share:

Read More

What should every PHP developer do to secure their site?

PHP Development Services - Laitkor

Use an existing PHP framework that provides for secure REST API’s and database access. Use that framework’s best practices for storing database credentials. You will also be able to stay informed of security vulnerabilities reported on the larger frameworks and plugins for that framework. The PHP Developers are required to study the references and understand the concepts well enough, then the applications will have a pretty decent level of security. But keep in mind that this isn’t the end of it. Keep studying and researching.

Securing website

1.    The main sets of rules are:

•    Validate all inputs
•    Sanitize all output
•    If using a DBMS consider using parameterized, typed queries.

2.    Everyone should learn from the Ashley Madison fiasco. They were virtually uncrackable because they used the built in PHP password hashing library.   There are hackers that simply refuse to try due to the amount of resources it would take.

3.    Every developer that cares about security might also take into consideration having an independent third party look at the final product. You can start with a friend to take a look or you could go with specialized companies that test your site / app fore holes.

4.    However, a programming language has nothing to do with security. It’s the programmer who needs to ensure the safety of his program. There are enough ways to write bad codes.

5.    To avoid your PHP web application secure, first try to prevent OWASP’s top 10 security risks. It is advised to use a framework. They have some features which come in handy in handling security threats for e.g. Active Records and Query builder for database transactions, Access controls / filters for authorizations. It is really important that you put both client side and server side validations in case of user inputs.

6.    To ensure that your PHP code is secure, you must start learning about all kinds of vulnerabilities, you can easily detect them in your code. Then all you need is to know how to avoid them. Or you could hire some security analyst to break your website without showing your code, and get an idea about all the vulnerabilities.

7.    Just by using any particular framework, you won’t be protected from all attacks. After all, these security attacks are not dependent on the framework you use. Try learning about security vulnerabilities and how to detect and avoid them.

A programming language is neither secure nor insecure, in and of itself. The code you write with that language is the important part. You can write insecure code within any “secure” framework, and secure coding requires additional effort.

Share:

Read More

What is the difference between C# and .Net?

.Net Application Development - Laitkor

.Net is an umbrella term which comprises of Framework Class Library (FCL) and many languages including C#, C++, VB.Net etc. which compiles source code and outputs IL (Intermediate Language). IL will be consumed by Common Language Runtime (CLR) and converts it into platform specific code during runtime by the JIT (Just- in- time) compiler. C# is a programming Language whereas .Net is a framework built by Microsoft and the developers are responsible for .Net Application Development.

The difference

1.    Since C# is a programming language, you can develop software utilizing the FCl and can target many platforms (including iOS- using Xamarin, Linux- using Mono, Windows, etc.). While .Net framework is better at compiling the source code.

2.    C# is actually a programming language that was developed by Microsoft for .Net, whereas .Net is a framework built by Microsoft. Think of the .Net framework as a large collection of Microsoft libraries that you can use from your C# or VB.NET.

3.    Csharp is known as C#, which is a programming language used when developing ASP.Net. It is specially designed for easy use in practically any purpose. While ASP.Net is a web application framework with the main goal to create web applications, web sites and web services.

4.    Programmers may use C# as a programming language for ASP.Net or choose other languages if fit and available. ASP.Net is built on Common Language Runtime. The current version of ASP.Net framework 2.0 is created with a slight improvement over the original ASP. C# can be easily converted to other language programs by simply changing syntax used.

5.    Network enabled technology aka.NET is a framework by Microsoft. C# on the other hand is a new generation programming language used generally by .Net developers. C# can also be used with a mono compiler.

6.    .Net framework defines the rules and supporting libraries that other languages shall use. It also helps you to call variable written in another language to be used in a different language. So, .Net is the law and C# is the citizen.

The clear difference between C# and .Net is, C# is a programming language while .Net is a framework. The programmers can use C# language for ASP.Net as well. All the major difference between them is discussed above.

Share:

Read More

Recommendations for mobile app development companies?

iOS App Development - Laitkor

depending on your budget, start applying for your “filters” and get connected to us for mobile app development. You can get a list of iOS app development companies, but ours company is a trusted one which consist of panel of expert developers suited for your Android and iOS app development requirement as per your choice.

You must go through company website very carefully, if it inspires you trust it else don’t go with it. Try to grasp the culture and vision of website, do they have one? Or are they just a slow-hand without proper equipped developers and tools.

1.  You must consider a company’s past work. You may try their other apps they’ve done to see if it meets your expectations in terms of UI and build quality. You can find the apps response if it was a successful one or not. Moreover, you can also see if their apps were featured by Apple, or any award in certain contest. Take references from past customers too.

2.  You can check out if the company has done work in the same field in which you are about in get your apps developed. For example; one company who is experienced in developing apps may not be the same on building location based apps.

3.  Try to get the work process of the developers by getting quotes from multiple developers. See if they are doing exactly evaluation of your request, if they are asking questions related to the close picture of your desired featured apps.

4.   If they are considering your e-mail and replying instantly to your questions and queries. This would show dedication towards work and customer relationship with the developer. You must also take into account the manner your communications are taken and replied, and how quickly you are getting replies to your queries. Are they Proactive?

Do they offer feedback and suggestions? Is it convenient to your proactive app developer to contact you via instant message or e-mail, Skype and how often?

5.    Consider their ways of organizing the work. Do they use project management tools like Jira, Basecamp and Asana? How about testing your app? If the work is not organized, it would be a prior indication that your app may not be completed on time and may not reach the quality that you are expecting.

If your apps require a backend, it is wisely to get things done with the company that can cover both the server and the mobile site, thus saving time in managing the relationship with just one service provider. The company must be a reputed one to assist you in publishing the apps to store to attract a large number of customers.

Share:

Read More

Is web2py a good Python framework for web?

Python Development Services - Laitkor

Web2py is one of the best Frameworks with the main goal to ease the use from setup to learning and extending towards distribution, coding and deployment. It is already able to manage things very well towards the verge of achieving goal and thus providing base to one of the successful python development Services.

Web2py: a good python web framework

1.    It offers a very wide variety of features set and allows a lot of flexibility. Day-by-day it is constantly improving with new releases every couple of weeks, and has attracted a very friendly, active and helpful community that is quickly growing.

2.    The documentations of web2py is excellent and is capable of getting support through extremely active mailing list. You are more expected to get a reply from a core developer within an hour or less.

3.    It is seen that many of the web2py modules can be used standalone or in conjunction with other frameworks. In fact a number of people are still using the DAL along with other frameworks, and even with non-web applications. Now Web2py offers gluino, which is a port of a number of the web2py modules for integration with the Flask, Bottle, Torando and Pyramid frameworks as well as wsgiref.

4.    It is totally up to you to decide if python is providing you your needs and web2py sticks to your requirement as a web framework. Web2py is easier to start for fresher candidate or beginners. The document may not be as good as Django but the user group is very helpful.

5.    After knowing web2py, you would find it easier to handle other web frameworks as well. It does not consume lots of time but would surely preach you lot of things.

6.    However, there are a few hindrances in the way of web2py. It is rare to find sites that combine web2py with other tools from the Python ecosystem. It is quite common to see non-web2py sites combine for nearly all sorts of things from the python world.

7.    If you are learning web2py, you must also learn another Python web tool as well. Flask would also be a good choice as it is small, lightweight and can probably be picked up in an evening.

If web2py is fulfilling all your needs, then it is the best choice for you. The python community and ecosystem is fantastic to go. If you only live in web2py, it may land you to a risk of wearing blinders to the bigger and better world. Web2py is excellent in terms of compatibility, gae compatibility, documentation and a lot more.

Share:

Read More

Which is more secure: Android or iOS app?

Android App Development Companies - Laitkor

Security mainly lies with the user. You are fairly unlikely to have yourself compromised if you are installing only big name trusted applications like Chrome, Twitter, Spotify, etc. but the problem tends to arise when you install other software. iOS is generally more secure.

However, Android gives users and applications more power, and this leads to more vulnerability as well. The iOS app development companies and android app development companies are always on the effort towards increasing security to their respective site.

Android or iOS app security

1.    Both Android or iOS app have their own methods to implement security. Android believes in opening up and trusting the users to know what they are doing; while iOS believes in controlling everything.

2.    Android rely on an open system in which each app declares what they are going to do when installed. They require permission before installations, but how many users generally mind that? Apps do access your contacts, images, browser history and these are all there in the permissions. Do not install the app unless you trust the publisher. Apart from that, never try to install any app outside the play store, unless you have an experience of what you are doing.

3.    Google closely monitor all the aps and have a kill switch which can automatically evaporate all malicious apps in seconds. It can even uninstall the app from your device just by a single command.

4.    In iOS, Apple controls everything and they believe in checking before allowing the app to publish. It takes at least 1 to 2 weeks before your apps can get published. That is really bad for developers, but good for users. However, most of the times apps get rejected for branding issues. So, you must assure that your application is not at all vulnerable. Always install from the official app store and that would work fine.

5.    From Malware point of view, Android or iOS has got too many malwares, according to statistics user downloaded one harmful app more than 260,000 times before the Google removed it from the app market.  It’s safe to assume that since Apple does not make APIs available to developers, the iOS operating system has fewer Malwares/vulnerabilities.

Since Apple is only the manufacturer for iOS so they control device security in best possible way, on the other hand Android has multiple device manufacturers so very difficult to manage device security. Between iOS and Android, iOS is more secure than android with its application sandboxing, extensibility which any of these features isn’t available on Android.

Share:

Read More

Which is better: a career as a PHP developer or as a Java developer?

PHP Application Programming - Laitkor

Choosing a language is just another option, you need to take up a good company product or startup where you can harness your skill. A good software engineer / developer keeps many tools (i.e. Computer programming Language) in his tool box. All programming language has their own pros and Cons; you have to choose them wisely for a task. Java is an Object Oriented Programming Language while PHP is a server side scripting language. Find it here whether a PHP Developer or Java developer, what is suited best.

A Language for better career

1.    As concerned with career, it totally depends on your skill and will. If you have a good knowledge of computer science, any company will hire and you can enjoy the work you do. You need to concentrate on fundamentals of CS to get a good salary and job.

2.    You must start with a company that will provide a great opportunity for the growth of your career. It is not so important about what technology they are using, unless they are using outdated technology. If you are a good Java developer (healthy programming), with good server and enterprise skills, then you will be able to work anywhere in the world and get paid in six-digits for doing so.

3.    Many big companies, inclusive of Google and Facebook prefer the use of Java rather than PHP. Since that is a subjective issue,it is clear that you develop your skill in one language rather than question which language is better.

4.    PHP is for web programming and Java is for enterprise PHP application programming. Now web programming means creating a shopping cart, creating an online reservation system etc. For Online products like these can easily be developed in a little span of time & minimum investmentwith PHP. Whereas,Java is to develop heavy enterprise applications involving online banking system, CRM, Insurance, Online trading application etc. So if you feel strong attraction for a web programming as your interest and passion, then go with the PHP else Java.

5.    If you want to work in an IT service/ support/ product development industry, Java is the better option than PHP. Also a Java developer earns a good salary package based on his/her skills and domains knowledge. For career growth, Java is not bad. You can go with it.

You need to find yourself in a better company which is better in terms of job opportunities, Salary hikes, career growth, future scope, etc. If you are a good software developer, you must have multiple tools with you, so you can fit in almost any development job. Be a Java developer or a PHP developer, but be what your passion and skills are.

Share:

Read More

Which one is better: Java or .Net?

.Net Application Development - Laitkor

Both are equally good and it solely depends on the purpose of your project and its requirements. Making a SRS would possibly help you get a clear picture of what are the functional and non-functional requirements of your project, and will let you choose a better language for implementation part be it .Net or Java or any other language. Java is evergreen language, but .Net is still growing faster that leads to more of .Net Application Development.

The better one

1. You can’t compare Java and .Net directly since Java is a language and .Net is an environment / framework. But you can compare Java and C# or J2EE and .Net. To select the better one, it would totally depend on what you are doing. If you wanted to write a large database application to run on Windows Server, then C# on .Net would be the better choice. If you wanted to run on Android phones, then Java / Android environment would be a better choice.

2.  Java is a language while .Net is a framework. You should learn java first and have a grasp on the basics of Object Oriented Programming. Learning C# would be a bad decision because there are simply so many things and some of them are really complicated to understand at first.

3.   Once you feel you are proficient in Java, you can learn the advanced topics like Object serialization, Multithreading, parallel programming. Do learn GUI topics as well and don’t only read theories. You need to study codes and try to understand the logic behind them then you can write codes.

4.   Once you feel you’ve mastered Java, move on C#. Learn language and framework. It will be a piece of cake once you master Java! But the vice versa is not just possible.

5.  .Net has less historical baggage and therefore is considered by some as a cleaner language. Java on the other hand has a larger open source ecosystem, and the reference implementation runs on all kinds of devices and operating systems.

6.   First, try to understand the main difference between Java and .Net as a programming language and framework respectively. Both .Net and Java is used for web development and in .Net framework you have options to choose difference languages like C++ and VB. When it comes to easiness, obviously .Net is easy to study and work.

If you are clear with them and have right problem solving skills, you can use any one of them. In case you are beginner and making a choice to get started than you should go with Java. Java may give you strong basics as you will have to write everything from scratch and has a wider market too. But .Net supports multiple Languages but Java is not.

Share:

Read More

Which PHP CMS is more secure: Drupal, WordPress or Joomla?

PHP Developers - Laitkor

All the three CMS’s are being contributed by a large group of developers and are active in development. As these are Open-source and actively being developed the PHP Developers strive to face any vulnerability. Updates and patches are released if they find any vulnerability. Every active CMS strive to be secure and provide hassle free experience.

Which is more secure?

1.    Any site can be considered “insecure”. If hackers can access banks, major security company websites, government information- a WordPress or Joomla install isn’t much for them. The key is to take as many precautions as possible, keep the core software updated version wise and realize that CMS’s are tools not answers to the security situation overall.

2.   The Joomla core is reasonably secure due to its more OOP nature coding. It has a robust framework, user-friendly back-end interface for better content management, support of innumerable extensions, eye candy look & feel and SEO friendly features which make Joomla an award winning CMS.

3.    Drupal has less vulnerability as compared to Joomla, and the condition to exploit Drupal needs permissions granted to trusted users. Joomla is more vulnerable due to the sheer number of exploits and the ability to trigger the exploit as an authenticated user.

WordPress has more security issues compared to Joomla and Drupal, but third party plugins help to add some extra firewall to enforce a lot of good security practices. One of the most popular of these plugins is all in one WordPress Security plugins.

4.    Drupal is comparatively much more secured than other content management systems. The enterprise level security makes Drupal website safe from hackers that is why the big enterprises and government websites are built-up with Drupal. Drupal can’t be beaten up by the WordPress or Joomla when it comes to delivering more than hundred types of stuff through a single website.

Instead of looking at security track records, consider security policies, whether security is taken seriously, If there are security guidelines for new developers, whether there’s dedicated security team and a process in place for reporting, fixing and distributing fixes. All three of them can be made to be pretty safe. What’s usually overlooked though, is that the real issues is with how hosting providers set up their servers.

Share:

Read More